Description

The VCA evaporative condenser is one of the industry leader in the forced draft, axial fan category.

Technical specifications

G-235 mill galvanised steel used for all units
All exposed cut edges are protected with a thick zinc coating applied after fabrication to ensure effective zinc corrosion barrier
Serpentine cooling coil built of continuous lengths of all prime surface steel and hot-dip galvanised after fabrication (HDGAF) to avoid zinc corrosion
Split coil designed for low pressure drop with sloping tubes for free drainage of fluid and multiple compressors
Maximum working pressure: 300 psig
Independent fan motors providing redundancy and options for capacity control
The fans, motors, and drive system are located outside the discharge air stream of the unit to protect them from moisture, condensation, and icing while facilitating maintenance
The fan drive system consists of a specially designed belts, taper lock sheaves and dedicated premium efficient cooling tower duty motor to provide maximum performance
High quality mechanical water level control assembly is standard with all units and has been specially designed to provide the most reliable operation while being easy to maintain
Standard spray water pump: Patented BAC 360^TM non- clog nozzles ensure even flow over the coil area and are simple to remove for maintenance. Parallel flow of air and spray water to allow for inspection and access to the top of the coils during full operation
The InterLok^TM System is a self-aligning casing/basin joint that makes assembly easier and increase the leak resistance of the joint
Standard 1” x 1” (2,54 x 2,54 cm) wire mesh screen is factory-installed over the air intake to prevent debris from entering the unit

Advantages

The VCA is the only counterflow forced draft condenser that has been shake table tested and verified with seismic ratings by an independent third party up to an SDS of 1.6g and meets IBC requirements.
Bearings selected for a minimum life of L₁₀ 94 000 hours
Extended lubrication lines are standard for lubrication of the fan shaft bearings
Oversized access door(s): 30” x 44” (76,2 x 111,76 cm)
A step for easier access is provided for each door
Axial fans lend to low fan HP, high efficiency, and quiet operation
5 years warranty motor and drive

Applications

Industrial refrigeration

RESULTS FOR FLUID TRANSPORT

PRODUCTS

VCA

Sign up to our Newsletter

Fill in the details below